How to Make Your Pool Table Last

Pool tables are no small investment and often cost a whole lot of money. A cheap pool table never did anyone any good, but the expensive ones require a good amount of care so that they can last long and you can get as many good quality games out of it as possible. In this article we’ll go through a couple of ways to make sure that you don’t ruin your pool table.

You’ll want to avoid smoking over the pool table. Letting cigarette ashes fall on your pool table top will mean that you’ll need to replace the felt sooner than you’d want. Also if any embers fall on the table top or the borders it can burn and leave an ugly hole, which can not only ruin the look of your pool table, but also damage the felt and make games uneven.

Try and keep drinks away from the pool table. Drinks are easy to spill, and most liquids will end up ruining your pool table, making it sticky and ugly.

And most importantly, by no means are you to mistake your pool table for an ordinary counter! The only things that belong on your pool table are the pool balls, nothing else. Other items could stain, scratch and damage you pool table. If you place something heavy on the top of the pool table it can bend it and cause the surface to be uneven, making for incredibly irritating pool games.

When cleaning your table, make sure to use a soft cloth and non-corrosive wood polish or a just a little water. The leather pockets should also be cleaned with a soft cloth that’s been dampened with a cleaning solution for leather. Get a table brush so that you can brush the table down once done with a game. You can even vacuum the felt from time to time do get rid of chalk residue and dust that tends to collect underneath.

Try and keep the pool table covered with a proper pool table cover whenever you’re not using it to protect it from getting scratched or stained. Don’t try and move the table around unnecessarily, as the positioning of the table is important and movement can throw off its balance.

With these tips you should be all set to maintain a good pool table that will last you for ages.

Sponsored by Pool Table Movers Worcester

Picking the Pool Table Size for You

So you’re planning on buying a brand new pool table. Before you jump into it, you should probably keep a couple of things in mind when it comes to the size of your pool table.

First of all, you’ll want to know the measurements of the room you’re going to place it in. You don’t want to get a pool table that’s too big for your space, now would you? There’s got to be enough space for not just the table, but for all the potential players to be able to comfortably move around it and position themselves without banging into anything or scraping the walls when they set themselves up to shoot.

The average pool table is 7 feet long. This seven foot table needs a room of at least 16 feet by 13 feet to comfortably fit. Of course, the more space the table gets around it, the better.

Check the length of your cue sticks as well, so they don’t end up scraping your walls. If you’re getting a pool table for children, it’s only natural that the cue sticks are going to be a little shorter. But if you’re getting a pool table for adults, particularly for multiple adults to be able to play, you’re going to want a whole lot more space.

There’s also the question of which style of pool you prefer. You could go for an American style table or an English style table. In tournaments, the official size for English tables is 7 feet and for American tables it’s 9 feet. Of course both table styles are available in smaller sizes, 6 feet for the English one and 7 feet for the American one. If what you’re looking for is versatility and a more durable table, you’ll probably want to go with the English one. If you want something flashy and cool-looking to impress your friends, the American one is the one for you.

Wherever you’re going to be playing, look out for obstructions. You don’t want to knock things over or have cabinets, vases or other things getting in the way of a good shot.

These are a few things to take into consideration when buying a new pool table.

Sponsored by Pool Table Movers Boston

Floor Tile Options

There are so many choices when it comes to floor tiles that the list could go on forever. Big, small, hexagon, square, and loads of other shapes and sizes. Tiles can make a room feel warm and cozy or bright and sharp. They can completely change the atmosphere of a space. Consulting professionals for advice on what styles and colors will suit your spaces the best is always a smart move if you’re trying to get the most out of your newly installed tiles.

You’ve got a lot of different tile patterns that you can choose from, but we’re going to look at just a few of them today to give you a little look into the wide variety of options you’ll have if you go for putting new tiles on your kitchen, bathroom or other spaces in your house.

The straight lay is a simple, classic design that is loved by many for just that; it’s simplicity. In a straight lay, you put tiles down of the same color and size, matching them perfectly with each other from edge to edge. The lines in between the tiles are filled with grout that you can adjust according to your style preferences. Straight lay is very easy to work with because you’re simply trying to get the tiles lined up with each other and you have very specific parameters to work in. Straight lay is not obtrusive and will allow other features in the room to shine. The only possible “issue” is that usually the tiles used for this style are square, and your room likely isn’t so you’ll end up with some extra pieces of tile.

Another style is the diagonal style, which is very similar to simple lay, only the tiles are turned 45 degrees to appear as diamond-shaped. This is a simple variation of simple lay that makes more of a visual impact. The layout won’t be as easy to plan out though.

There are many more tile laying style but these are just a few to get you started!

Sponsored by Tile Contractor San Diego CA

Hot Tub Foam: Where Does It Come From and How Do You Get Rid of It?

Hot tubs are excellent for relaxing your muscles and letting go of stress. Taking some time to soak in a hot tub on a regular basis can help you sleep better and improve your overall mood.

But have you ever uncovered your hot tub to find the whole tub bubbling with frothy, foamy water? The truth is that a whole lot of people have problems with foam in their hot tubs and most people don’t know how to deal with it. Where does hot tub foam come from and how can we rid our tubs of it? That’s what we’re here to find out today.

One of the main reasons for finding foam in your hot tub water can be because of soap or other beauty products. Often residue from soap, body lotion, fabric softener, skin oil, makeup and hair products can get stuck in your swimsuit and get released by the bubbling hot water from the tub, causing the water to get all foamy. You can use a scum digester to help you get rid of foamy water caused by such products. If you use a floating oil absorber and an oxidizing shock after getting out of the hot tub it can also work to keep foam out.

The surface tension of the water can be affected by low levels of calcium in the water. This can cause excessive suds and can even be harmful to the equipment of the hot tub. By using Hardness test strip every week you can regularly check the calcium hardness levels of your hot tub and keep them under control. If the calcium hardness levels are getting too low, you can use Calcium Hardness Increaser to fix them.

If the pH value of your hot tub water is imbalanced it can result in multiple problems, not just foam, but even green and stinky water. If you want to prevent foamy water caused by high pH levels, use pH Decreaser. If you’re looking to raise the pH levels, use Easy pH to bring up low levels.

Most importantly, test your water’s pH levels weekly to see if their where they need to be. These tips should help you maintain good, clear water in your hot tub.

Sponsored by Hot tub repair Philadelphia